Battery Safety and Usage Guidelines
Batteries supplied with STRONG products :
Batteries in our products are easily removable and can be replaced with certified equivalents. To ensure safe and optimal use, please follow the specific guidelines provided below :
Battery Safety and Maintenance:
When used correctly, batteries provide a safe and reliable source of power. However, if they are misused or abused, overheated, leaking -or in extreme cases explosion or fire- can occur.
Safety Tips
- Follow these safety principles for all batteries supplied with our products:
- Always follow warnings and manufacturers instructions for both the batteries and the battery-operated product. Use only the correct type and size battery indicated.
- Check the contacts of both the battery and the battery-operated product for cleanliness.
- Always insert the batteries correctly with regard to polarity (-/+), matching the positive and negative symbols of both battery and product. Putting them in backwards may inadvertently charge the batteries resulting in venting or leaking.
- Remove and safely dispose of exhausted or damaged batteries immediately.
- Replace all batteries in battery-operated products at the same time and with the batteries of the same type only.
- Do not short circuit batteries. When the positive (+) and negative (-) terminals of a battery are in contact with each other, the battery can become short circuited. For example, loose batteries in a pocket with keys or coins can be short circuited possibly resulting in venting or explosion.
- Do not heat batteries.
- Do not crush, puncture, dismantle or otherwise damage batteries.
- Do not charge non-rechargeable batteries.
- Keep batteries out of reach of small children.
1. Home networking products
• DO NOT disassemble the product. Disassembling the product poses a risk of electric shock!
• Use this device only with appropriate mains supply written on the product label.
• Do not activate the product in places where the use of wireless products is prohibited or where it can cause interference or hazards (hospitals, clinics,health facilities, etc.).
• KEEP THE DEVICE AND ITS COMPONENTS OUT OF REACH OF CHILDREN AND DO NOT ALLOW CHILDREN TO PLAY WITH THE DEVICE. THEY MAY BE INJURED, CAUSE INJURIES TO OTHERS OR DAMAGE THE DEVICE. THE DEVICE INCLUDES SMALL, POINTED PARTS WHICH CAN CAUSE INJURIES OR BECOME DETACHED AND CAUSE CHOKING.
• The device includes a transmitter and a receiver. When on, it receives and transmits radio frequency energy. You must be careful when using the device very near to individual medical devices, such as pacemakers and hearing aids. All wireless products are sensitive to interference which may affect their performance.
• The device is designed for operation at a distance of at least 20 cm from anyindividual. Failure to comply with this instruction may lead to exposure to radio frequency energy in excess of the limits set forth in relevant directives.
• Where there is a possible explosive atmosphere, you must comply with all posted instructions and must, upon request, deactivate the device or any other wireless device. Areas with possible explosive environments are refueling stations, spaces under boat decks, fuel or chemical transportation or storage facilities, as well as areas where the air contains chemicals or particles (such as grains, dust or suspended metallic particles).
• The openings on the top and at the bottom are provided for ventilation. To ensure reliable operation of the device and to protect it from overheating, these openings must not be blocked or covered.
• The device should never be placed near or over a radiator or heat register, or in a built-in installation unless proper ventilation is provided.
• Use only the AC adapter which is included in the product package. Any other adapter may cause damage to the device. Such damage is not covered under warranty.
• Make sure that you have inserted the cables supplied in the product package into the correct ports for proper operation.
• Never push objects of any kind into this device through the enclosure openings other than the “RESET” hole as they may touch voltage points or short out parts which could result in fire, explosion or electric shock and damage the device permanently.
• DO NOT turn on or power cycle the device if there is gas leakage, try to disassemble the device or any of its accessories including the power adapter, try to repair the power adapter and its cable.
• Never spill liquid of any kind on the device or use this device near water (such as near a bath or swimming pool, in a wet basement, etc.).
• DO NOT expose the device to moisture, dust or corrosive liquids or use the device outdoors and make sure that all connections are located indoors to avoid risk of electrocution.
• Avoid operating this device during a lightning storm and under direct sunlight.
• Turn off the device completely before cleaning. The device can be turned off completely only when the AC adapter is unplugged. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.
• Always disconnect the power cord from the wall outlet and disconnect any other cables before servicing this product. Under the following conditions, your product must be serviced by qualified service personnel;
- when the power cord or plug isdamaged or frayed.
- if liquid has spilled into thedevice.
- if the product has been exposed torain or water.
- if the device does not operatenormally when the operating instructions are followed.
- if the device has been dropped orenclosure has been damaged.
- if the device exhibits a distinctchange in performance, indicating a need for Service.
2. TVs, Receivers & Video projectors
• Only use attachments/accessories specified or provided by the manufacturer (such as the exclusive supply adapter, battery etc.).
• Please refer to the information on the product enclosure for electrical and safety information before installing or operating the apparatus.
• To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
• The ventilation should not be impeded by covering the ventilation openings with items, such as newspaper, tablecloths, curtains, etc.
• During operation, check every time if cooling blower blows air gently and runs smoothly.
• The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
• This mark indicates a risk of electric shock. The external wires must be installed by an instructed person or ready-made leads or cords must be used.
• To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.
• Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent types.
• The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like.
• Excessive sound pressure from earphones and headphones can cause hearing loss.
• Listening to music at high volume levels and for extended durations can damage one’s hearing.
• To reduce the risk of damage to hearing, one should lower the volume to a safe, comfortable level, and reduce the amount of time listening at high levels.
• The mains plug or appliance coupler is used as disconnect device, it shall remain readily operable. When not in use and during movement, please take care of the power cord set, e.g. tie up the power cord set with cable tie or something like that. It shall be free from sharp edges or similar which can cause abrasion of the power cord set. When put into use again, please make sure the power cord is not damaged. The absence of a light indication on the apparatus does not mean that it is fully disconnected from the mains. To disconnect the apparatus completely, the mains plug must be pulled out.
• Attention should be drawn to the environmental aspects of battery disposal.
• No naked flame sources, such as lighted candles, should be placed on the apparatus.
• To prevent the spread of fire, always keep candles or other open flames away from this product.
• A USB terminal can provide a maximum of 500 mA.
• Equipment with this symbol is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical
Precautions
• Never try to open the device. It is dangerous to touch the inside of the device due to high voltages and possible electrical hazards.
• Opening the device will void the warranty of the product. Refer all maintenance or servicing to suitably qualified personnel.
• When you are connecting cables, be sure that the device is disconnected from the mains supply voltage. Wait a few seconds after switching off the device before you move the device or disconnect any equipment.
• It is a necessity that you only use an approved extension and compatible wiring that is suitable for the electrical power consumption of the installed equipment. Please ensure that the electrical power supply corresponds with the voltage on the electrical identification plate at the back of the device.
• Risk of explosion if the battery is replaced by an incorrect type.
• Disposing of a battery into the fire or a hot oven, or mechanically crushing or cutting a battery can result in an explosion.
• Leaving a battery in an extremely high temperature surrounding environment can resultin an explosion or the leakage of flammable liquid or gas.
• A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.
3. Wi-Fi cameras
Warning
• Only use the Power Supply Unit supplied in the original packaging.
• Do not disassemble or modify the product in any way. (We will not take any responsibility for the problems caused by unauthorised modifications or maintenance).
• Please keep all the original packaging materials of the product properly. If there is any problem, please use the packaging materials to pack the product and return it to the manufacturer for treatment. We cannot accept accidental damage in transport caused by non-original packaging materials.
• Please contact us if you suspect that the product may have been compromised on your network (https://eu.strong-eu.com/vulnerability-disclosure-policy/), or if the product is not working properly (https://eu.strong-eu.com/contact-us/).
• To report any vulnerability breach please contact: dpo@strong-eu.com.
• Do not install products in an environment that may be subject to vibrations, shock or electromagnetic interferences.
• Do not install the product outdoors.
• Do not install the product where it may come into contact with water or corrosive products.
• Operate the camera within the environmental limits set out in its QIG.
• Ensure you always keep your password private and secure.
• Please keep all the original packaging materials of the product properly. If there is any problem, please use the packaging materials to pack the product and send it to the agent or return it to the manufacturer for treatment. We cannot accept accidental damage in transport caused by non-original packaging materials.
• Please do not turn the lens by hand after power-on.
• Please plug and unplug the Micro SD card only after disconnecting the power supply.
4. POE cameras
Warning
• Please use the power supply that meets SELV requirements.
• Do not disassemble or modify the product in any way. (We will not take any responsibility for the problems caused by unauthorised modifications or maintenance).
• Please keep all the original packaging materials of the product properly. If there is any problem, please use the packaging materials to pack the product and return it to the manufacturer for treatment. We cannot accept accidental damage in transport caused by non-original packaging materials.
• Please contact us in if you suspect that the product may have been compromised on your network (https://eu.strongeu.com/vulnerability-disclosure-policy/), or if the product is not working properly (https://eu.strong-eu.com/contact-us/).
• To report any vulnerability breach please contact:dpo@strong-eu.com.
Operating environment
• Do not install products in an environment that may be subject to vibrations, shock or electromagnetic interferences.
• Operate the camera within the environmental limits set out in its Quick Guide.
• Do not touch the lens directly. If you need to clean it, please slightly dampen a soft cloth with alcohol and gently wipe off the dust.
• Please keep the product away from liquid environment.
• Please make sure the product is firmly installed on the wall or ceiling
5. NVR
Warning
• Only use the Power Supply Unit supplied in the original packaging.
• Please use this product under the electrical safety regulations of the country and applicable regions.
• Do not disassemble or modify the product in any way. (We will not take any responsibility for the problems caused by unauthorised modifications or maintenance).
• Please keep all the original packaging materials of the product properly. If there is any problem, please use the packaging materials to pack the product and return it to the manufacturer for treatment. We cannot accept accidental damage in transport caused by non-original packaging materials.
• Please contact us in if you suspect that the product may have been compromised on your network (https://eu.strong-eu.com/vulnerability-disclosure-policy/), or if the product is not working properly (https://eu.strong-eu.com/contact-us/).
Operating environment
• The equipment should be installed horizontally in a well-ventilated place, with a minimum gap of 10cm around, and do not cover with items, such as newspapers.
• Please install the product in a stable place to prevent it from falling.
• The equipment must not be exposed to water droplets or splashes, and objects filled with liquids, such as vases, must not be placed on the product.
• Please keep the product away from humidity, exposure to sunlight and high temperature,and also away from items with magnetic force.
• Avoid scratching the case and interface, and avoid the product being damaged by dropping, throwing or being subjected to a strong impact.
• Please use the power adapter supplied to prevent damage to the unit.
• Batteries must not be exposed to overheating.
• The external power adapter is used as a power disconnection device, please pay attention to safe plugging.
• The input and output interfaces of this product are only suitable for Class Il equipment.
• When connecting communication cables, ensure proper lightning protection. Do not connect an Ethernet cable that comes from outdoors directly to the NVR; this is strictly prohibited.
• Please select the hard disk recommended by the manufacturer to meet the read and write requirements for a long time and a large amount of data (https://eu.strong-eu.com/securitystorage-whitelist/). At the same time, please purchase from official channels to ensure the quality of the hard disk.
6. Handling and Transportation:
• Handle the device carefully to avoid damage. Do not drop, bend or strike it.
7. Appropriate disposal of the product:
(Electric& electronic equipment waste)
The signs affixed on the product, or its accompanying manuals indicate that it should not be disposed of with other domestic waste when its life cycle is over. To help
